PM Athermal AWG-PM Series-Hirundo

PM Athermal AWG

16/32/40/48/64/80/96Ch PM AAWG Module

Hirundo‘s Array wave guide grating wave division multiplebies can transmit up to 96 wavelengths of photosynthesis waves or the combined light waves into independent light waves. Widely used in dense wave-splitting multiplexing systems. The product has a Gaussian type and flat top type two options, with narrow channel frequency (200/100/150/75/50GHz), high isolation and so on.

Parameter Specification

Parameters	100G AAWG	100G AAWG	50G AAWG	75G AAWG	150G AAWG	150G AAWG
Chip Type	Gaussian	Flat top	Flat top	Flat top	Gaussian	Flat top
Operating Wavelength(nm)	1525-1570 (C-band)	1525-1570 (C-band)	1525-1570 (C-band)	1525-1570 (C-band)	1260-1360 (O-band)	1525-1570 (C-band)
Channel	16 ~ 48	16 ~ 48	80/96	64	17	32

Product Highlights

High channel

Panda PM Optical Fiber

Polarization Modes

Check out the AWG Channel Plan Port here-50GHz/ 75GHz/100GHz/150GHz >>

Spectrograms

Packaging

Our production plant

Parameters	Notes	Specifications		Units
Parameters	Notes	Min	Max	Units
Channels		16	96	Ch
Channel Spacing		50		GHz
Reference Pass-band	Relative to ITU Grid	± 0.05		nm
ITU Frequency	On ITU grid in C-band	196.1	191.35	THz
ITU Wavelength	On ITU grid in C-band	1528.773	1566.723	nm
Center Frequency Accuracy	Maximum of the absolute deviation of the 3 dB center wavelength from ITU grid over all channels	-0.04	0.04	nm
Insertion Loss	Maximum of the insertion loss across the ITU pass-band over all channels ( see note1)		6.5	dB
Insertion Loss Uniformity	Maximum insertion loss variance across all channels		1.5	dB
Ripple	Maximum of the loss variance across the ITU pass-band over all channels		0.7	dB
Extinction Ratio		15		dB
1dB Bandwidth	1dB from min Insertion Loss, full width, average polarization	0.18		nm
3dB Bandwidth	3 dB from min Insertion Loss, full width, average polarization	0.28		nm
20 dB bandwidth	20 dB from min Insertion Loss, full width, average polarization		0.7	nm
Adjacent Channel Isolation	Ratio of peak transmission to the maximum transmission over both adjacent pass-bands	25		dB
Non-Adjacent Channel Isolation	Ratio of peak transmission in channel pass-bands to maximum transmission over all non-adjacent pass-bands	30		dB
Total Crosstalk	Ratio of power in channel to power in all other pass-bands	20		dB
Polarization Dependent Loss	Maximum ratio of transmissions over all polarization states, over the ITU pass-band		0.5	dB
Return Loss		40		dB
Polarization Mode Delay (PMD)	In Reference Passband over all channels		1	ps
Chromatic Dispersion	In Reference Passband over all channels	-35	35	ps/nm
Optical Power	at common port		23	dBm

Typical WDM-PON system

Product Environmental Compliance Information